![]() ![]() ![]() On the first FAT32 formatted usb drive you just need a couple files in the root of the drive.(you may get away with one, but I used 2) 2 usb drives, no substantial size needed.It has the SMC LAN 7500 chipset, which is the important part I used the startech USB210000S2 Usb ethernet adapter.A usb hub, any hub with 3 or more ports should do.What I used (I did 64 bit efi, substitute 32 bit versions of. It’s a little bit abstract, but not too hard, I promise, give it a chance. However since that didn’t work for me, I found a different method. Supposedly you should be able to just enable the network stack in bios and then if it’s a ethernet adapter that’s recognized you can set it as a boot option or select it by hitting esc to bring up the boot menu. If you don’t have a efi shell, but have a efi bios, use rEFInd to boot to a efi said in UEFI-PXE-Boot (Asus t100 Tablet): Assuming your DHCP or dnsmasq is already setup properly, copy the ipxe.efi file to a usb or local drive on the host, then run it from an efi shell.įor usb ethernet adapters load the the efi driver first.
0 Comments
Leave a Reply. |